Skip to content
CENTER-PIVOT Haying DISC MOWER
New Holland equipment
CLEANER AND CLOSER CUTTING
Get the cleanest and closest cut yet with the MowMax™ II PLUS true modular cutterbar. Faster knife tip speed, a slimmer cutterbar profile, and reshaped rock guards improve cut quality while providing a 30% lower cutting height.
PIVOT TO GREATER PRODUCTIVITY
Whether you need a nimble mower to enter tight places or big capacity for wide-open spaces, four center-pivot models, with cut widths from 10- to 16-feet wide, are designed and built with pride in New Holland, Pennsylvania.
TIME-SAVING INNOVATIONS
The standard QuickMax™ knife-change system and ShockPRO™ hubs are designed to save you hassle when you’re making hay. For additional peace of mind, the cutterbar is backed by a 36-month warranty.
FROM WIDE SWATHS TO NARROW WINDROWS
Choose between the chevron intermeshing rubber or steel rolls, or the LeaningEdge™ flail tine conditioning system to fit your needs. Enhanced swath control surfaces behind the conditioning system result in neater-looking swaths with improved dry down.
Overview
Models
Overview
Whether you need a nimble mower to enter tight places, or big cutting capacity for wide-open spaces, there’s a Discbine PLUS center-pivot disc mower-conditioner to suit your needs.• Discbine 310 PLUS – If you need center-pivot productivity in a nimble, low-PTO-horsepower package, look no further than the Discbine 310 PLUS. It requires just 80 PTO horsepower to provide a 10’ 1” cut and can be equipped with a 540- or 1,000-rpm drive perfect for utility and mid-range tractors.• Discbine 312 PLUS – For maximum cutting capacity with a transport width under 12’, choose the Discbine 312 PLUS. It provides an 11’ 7”-wide cut, while its overall transport width is a maneuverable 11’ 10”.• Discbine 313 PLUS – With a Discbine 313 PLUS, you’ll gain an additional 1’ 4”-wider cut for increased cutting capacity compared to the Discbine 312 PLUS. You’ll also benefit from a wider cutting-to-conditioning ratio with the 125”-wide conditioning system.• Discbine 316 PLUS – If big, wide-open fields are part of your haymaking routine, maximize your productivity with the Discbine 316 PLUS. It offers the widest cutting width in the series at 16’ 5” to make quick work of big stands of hay. Haymaking season is no time for delays. That’s why we pioneered our true modular disc cutterbar decades ago. From this original design through today, the legendary New Holland disc cutterbar has been known for strength, reliability, and easy service. The latest design–the ultra-reliable MowMax™ II PLUS disc cutterbar–is no exception. Like the cutterbar featured on Durabine™ PLUS disc headers for Speedrower® PLUS self-propelled windrowers, this cutterbar provides commercial-grade durability with a bigger discs, longer knives, and a slimmer design for our cleanest and lowest cut yet. To adapt to crop types, changing conditions, and seasonality, you need an adaptable conditioning system that’s sized appropriately to the cutterbar. WideDry™ conditioning systems deliver. Unlike competitive machines with narrow conditioning systems and multiple pairs of co-rotating discs, WideDry means you get smooth crop flow from the cutterbar to the appropriately sized conditioning system of your choice. Whether you choose the chevron intermeshing rubber rolls, chevron intermeshing steel rolls, or the LeaningEdge™ flail tine conditioning system, you’ll find infinite adjustments and impressive uniformity that result in faster dry down. Fast drying requires crop to be evenly distributed over a wide swath. The Discbine PLUS Series provides enhanced swath control surfaces behind the conditioning system. The full-width horizontal swath gate and windrow forming shields have both been extended five inches longer than prior models for improved crop control and greater windrow uniformity. Together, they produce a tunnel effect for more precise windrow control, helping to tuck the edges in for neater-looking swaths with improved dry down. From the hitch to the swath doors, all four Discbine PLUS models are designed and built with pride in New Holland, Pennsylvania. Our 341-acre campus serves as our North American headquarters and global Center of Excellence for Hay and Forage. Here, the expertise of our engineering, research and development, marketing, and manufacturing teams come together to build Discbines alongside other products, like Roll-Belt™ round balers and Hayliner® small square balers – all with haymakers like you in mind. Along with productivity, performance, and protection, the Discbine PLUS Series is polished with all-new Natural Flow decals and styling. Yellow accents signify commercial-grade cutterbar performance, like Durabine™ PLUS disc headers used on Speedrower® PLUS self-propelled windrowers.
PIVOT TO THE SIZE AND PRODUCTIVITY YOU NEED
A CUT ABOVE THE REST
WIDEDRY™ CONDITIONING SYSTEMS DRY HAY FAST
BETTER CONTROL EQUALS BETTER WINDROWS
PROUDLY BUILT IN NEW HOLLAND, PENNSYLVANIA
A PLUS MEANS…
Models
Discbine® 310 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 10’ 4” (3.2) |
| CUTTING WIDTH FT. IN. (M) | 10’ 1” (3.0) |
Discbine® 312 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 11’ 10” (3.6) |
| CUTTING WIDTH FT. IN. (M) | 11’ 7” (3.5) |
Discbine® 313 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 13’ 1” (4.0) |
| TRANSPORT WIDTH FT. IN. (M) | 13’ 5” (4.03) |
Discbine® 316 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 16’ 8” (5.07) |
| CUTTING WIDTH FT. IN. (M) | 16’ 5” (5.0) |
Overview
Models
Data sheets
Overview
Whether you need a nimble mower to enter tight places, or big cutting capacity for wide-open spaces, there’s a Discbine PLUS center-pivot disc mower-conditioner to suit your needs.• Discbine 310 PLUS – If you need center-pivot productivity in a nimble, low-PTO-horsepower package, look no further than the Discbine 310 PLUS. It requires just 80 PTO horsepower to provide a 10’ 1” cut and can be equipped with a 540- or 1,000-rpm drive perfect for utility and mid-range tractors.• Discbine 312 PLUS – For maximum cutting capacity with a transport width under 12’, choose the Discbine 312 PLUS. It provides an 11’ 7”-wide cut, while its overall transport width is a maneuverable 11’ 10”.• Discbine 313 PLUS – With a Discbine 313 PLUS, you’ll gain an additional 1’ 4”-wider cut for increased cutting capacity compared to the Discbine 312 PLUS. You’ll also benefit from a wider cutting-to-conditioning ratio with the 125”-wide conditioning system.• Discbine 316 PLUS – If big, wide-open fields are part of your haymaking routine, maximize your productivity with the Discbine 316 PLUS. It offers the widest cutting width in the series at 16’ 5” to make quick work of big stands of hay. Haymaking season is no time for delays. That’s why we pioneered our true modular disc cutterbar decades ago. From this original design through today, the legendary New Holland disc cutterbar has been known for strength, reliability, and easy service. The latest design–the ultra-reliable MowMax™ II PLUS disc cutterbar–is no exception. Like the cutterbar featured on Durabine™ PLUS disc headers for Speedrower® PLUS self-propelled windrowers, this cutterbar provides commercial-grade durability with a bigger discs, longer knives, and a slimmer design for our cleanest and lowest cut yet. To adapt to crop types, changing conditions, and seasonality, you need an adaptable conditioning system that’s sized appropriately to the cutterbar. WideDry™ conditioning systems deliver. Unlike competitive machines with narrow conditioning systems and multiple pairs of co-rotating discs, WideDry means you get smooth crop flow from the cutterbar to the appropriately sized conditioning system of your choice. Whether you choose the chevron intermeshing rubber rolls, chevron intermeshing steel rolls, or the LeaningEdge™ flail tine conditioning system, you’ll find infinite adjustments and impressive uniformity that result in faster dry down. Fast drying requires crop to be evenly distributed over a wide swath. The Discbine PLUS Series provides enhanced swath control surfaces behind the conditioning system. The full-width horizontal swath gate and windrow forming shields have both been extended five inches longer than prior models for improved crop control and greater windrow uniformity. Together, they produce a tunnel effect for more precise windrow control, helping to tuck the edges in for neater-looking swaths with improved dry down. From the hitch to the swath doors, all four Discbine PLUS models are designed and built with pride in New Holland, Pennsylvania. Our 341-acre campus serves as our North American headquarters and global Center of Excellence for Hay and Forage. Here, the expertise of our engineering, research and development, marketing, and manufacturing teams come together to build Discbines alongside other products, like Roll-Belt™ round balers and Hayliner® small square balers – all with haymakers like you in mind. Along with productivity, performance, and protection, the Discbine PLUS Series is polished with all-new Natural Flow decals and styling. Yellow accents signify commercial-grade cutterbar performance, like Durabine™ PLUS disc headers used on Speedrower® PLUS self-propelled windrowers.PIVOT TO THE SIZE AND PRODUCTIVITY YOU NEED
A CUT ABOVE THE REST
WIDEDRY™ CONDITIONING SYSTEMS DRY HAY FAST
BETTER CONTROL EQUALS BETTER WINDROWS
PROUDLY BUILT IN NEW HOLLAND, PENNSYLVANIA
A PLUS MEANS…
Models
Discbine® 310 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 10’ 4” (3.2) |
| CUTTING WIDTH FT. IN. (M) | 10’ 1” (3.0) |
Discbine® 312 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 11’ 10” (3.6) |
| CUTTING WIDTH FT. IN. (M) | 11’ 7” (3.5) |
Discbine® 313 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 13’ 1” (4.0) |
| TRANSPORT WIDTH FT. IN. (M) | 13’ 5” (4.03) |
Discbine® 316 PLUS
| TRANSPORT WIDTH FT. IN. (M) | 16’ 8” (5.07) |
| CUTTING WIDTH FT. IN. (M) | 16’ 5” (5.0) |
Data sheets
Discbine® PLUS Center-Pivot Disc Mower-Conditioners – Brochure
Financing and
leasing available
The equipment you need, the payment plan that works for you.
At Terapro, we have various financing options offering the best rates on the market for your purchase or long-term lease of new or used equipment. In some cases, we’ll buy back your used equipment. Talk to your representative for more information!
